DTI-504 Pre-Heat Batch Oven

SPECIFICATIONS
Exterior Dimensions | 4′-6″ L x 5′-10″ W x 5′-0″ H (1372mm x 1778mm x 1524mm) |
Interior Dimensions | 3′-0″ L x 3′-6″ W x 3′-0″ H (914mm x 1067mm x 914mm) |
Heat Source | Single electric heater controlled by SCR |
Max Operating Temperature | 800°F (427°C) |
Insulation Thickness | 8″ (203mm) |
Operating voltage | 480-volt / 3-phase / 60-hertz |
Airflow | Horizontal cross flow |
Circulation Fans | One (1) circulation fan |
DESCRIPTION
The DTI-504 batch oven cures automotive brake pads, and is designed to cure two (2) full racks of product in a six (6) hour cycle. The batch oven cycle is a maximum of five (5) hours and a one (1) hour cooling cycle. The ramp rate of the batch oven is approximately 4°F per minute from ambient to 446°F (230°C). The process requires the dwell temperature be reached in 60 to 90 minutes. Once the dwell temperature is reached, the brake pads soak for 180 minutes.
FEATURES
BATCH OVEN CONSTRUCTION FEATURES
This batch oven is designed to accommodate existing product racks, and the oven floor is not insulated in order to accommodate these racks. This batch oven processes 1,600 to 2,000 pads per batch.

Davron exists to be the industry leader in non-standard products engineered to meet the customer's need and unique process.
Address
4563 Pinnacle Lane
Chattanooga, TN 37415
Phone
423-870-1888
info@davrontech.com
Fax
423-870-3355




