Customer directive DTI-1404 is designed to perform a curing cycle for military plastics. Due to the nature of the product this oven must operate at extremely low levels of atmosphere while at temperature. Exposure to oxygen above a set temperature can potential ruin the product, so extreme care is taken to ensure all seams and […]

The DTI-1253 is an indexing furnace system for annealing automotive engine components that operates with a 99.8% pure inert atmosphere. Parts to be processed are placed on the oven entrance shuttle table, one at a time, with a production rate of 1-part every 45-seconds.

The DTI-1251 indexing conveyor oven is used in the testing of sensors utilized in the automotive industry. As the parts are heated in the oven chamber gases internal to the parts expand. The oven simulates conditions that will be experienced by the parts during normal operation of the vehicle.

The DTI-1239 inert batch oven is used to dry aluminum parts. The oven is a top load type oven and parts are placed in a basket for drying. The oven door is pneumatically actuated and opens and closes automatically.