Customer directive DTI-1516 was one of many pieces designed, manufactured, and integrated into a production line. This specific oven was designed to preheat wood siding products prior to a coating process. In order to achieve a successful coating process, the panels and boards need to exit the preheat oven at the optimal temperature. The panels […]

Customer directive The customer wanted a means to preheat Bico Nonwoven materials utilizing forced convection from the top and/or bottom of the material. Description The material is supported by a tube frame that is manually loaded into the oven by the operator. The operator pushes the frame into the oven through pneumatic chamber door openings […]

Customer directive Davron was directed to engineer and manufacture an oven system to heat the customer’s electrical harnesses up to temperature prior to moving through the assembly process. The customer required flexibility to move the equipment around the facility as needed and had floor space constraints that needed to be designed around. In order to […]

Customer directive Our customer wanted to place the products on an indexing conveyor that would move the product into the heated chambers for process. The heated air in the Oven is forced through the insulation pad with a vertical down airflow. The airflow design provides efficiency in regards to process time and uniformity. Description The […]