DTI-706 Curing Batch Oven
Description
The DTI-706 batch oven cures silicone rubber on a tubing product. The rubber is added to the tubing, and the product is placed in the batch oven to be cured. The operation is fairly simplistic. The temperature controller is set at the set point temperature. The product is then loaded into the batch oven and soaks at temperature for 30 minutes before unloading. The batch oven utilizes a forced air circulation and exhaust fan to exhaust a small amount of solvents present in the process.
Specifications
| Exterior Dimensions | 2′-6″ L x 4′-6″ W x 10′-0″ H (762mm x 1372mm x 3048mm) |
| Interior Dimensions | 2′-6″ L x 2′-6″ W x 7′-6″ H (762mm x 762mm x 2286mm) |
| Heat Source | Single electric heater controlled by SCR |
| Max Operating Temperature | 500°F (260°C) |
| Design Operating Temperature | 300°F – 500°F (149°C – 260°C) |
| Insulation Thickness | 6″ (152mm) |
| Operating Voltage | 480-volt / 3-phase / 60-hertz |
| Airflow | Horizontal cross flow |
| Circulation Fans | One (1) circulation fan |
| Exhaust Fans | One (1) exhaust fan |
| Control | Digital Indicating Temperature Controller |
Alternative capabilities
Davron Technologies, Inc. provides process specific industrial inert atmosphere oven applications, including the following:
- Industries Served: Automotive, Pharmaceutical / Medical, Aerospace, Glass, Composites
- Materials/Parts Processed: Castings, Glass, Plastics, Steel, Engine Components, Cast Steel/Aluminum
- Process Applications: Inert Stress Relieving, Inert Atmosphere Annealing, Inert Atmosphere Batch, Inert Atmosphere Conveyor/Continuous
