DTI-504 Preheating Batch Oven
Description
The DTI-504 batch oven cures automotive brake pads, and is designed to cure two (2) full racks of product in a six (6) hour cycle. The batch oven cycle is a maximum of five (5) hours and a one (1) hour cooling cycle. The ramp rate of the batch oven is approximately 4°F per minute from ambient to 446°F (230°C). The process requires the dwell temperature be reached in 60 to 90 minutes. Once the dwell temperature is reached, the brake pads soak for 180 minutes.
Features
BATCH OVEN CONSTRUCTION FEATURES
This batch oven is designed to accommodate existing product racks, and the oven floor is not insulated in order to accommodate these racks. This batch oven processes 1,600 to 2,000 pads per batch.
Specifications
| Exterior Dimensions | 4′-6″ L x 5′-10″ W x 5′-0″ H (1372mm x 1778mm x 1524mm) |
| Interior Dimensions | 3′-0″ L x 3′-6″ W x 3′-0″ H (914mm x 1067mm x 914mm) |
| Heat Source | Single electric heater controlled by SCR |
| Max Operating Temperature | 800°F (427°C) |
| Insulation Thickness | 8″ (203mm) |
| Operating voltage | 480-volt / 3-phase / 60-hertz |
| Airflow | Horizontal cross flow |
| Circulation Fans | One (1) circulation fan |
Alternative capabilities
Davron Technologies, Inc. provides process specific industrial inert atmosphere oven applications, including the following:
- Industries Served: Automotive, Pharmaceutical / Medical, Aerospace, Glass, Composites
- Materials/Parts Processed: Castings, Glass, Plastics, Steel, Engine Components, Cast Steel/Aluminum
- Process Applications: Inert Stress Relieving, Inert Atmosphere Annealing, Inert Atmosphere Batch, Inert Atmosphere Conveyor/Continuous
