DTI-1144 Conveyor Curing Oven
DESCRIPTION
The DTI-1144 conveyor oven cures automotive disc brake pads after press forming. The press formed parts are manually loaded from the presses into the conveyor oven to provide continuous product flow. The oven conveyor consists of rigid trays; each tray contains eight parts across the width of the conveyor oven. Each press forms two parts per cycle, which are then placed in specific tray locations within the conveyor oven to maintain part segregation throughout the length of the oven. This system provides the ability to manufacture different parts at the same time and cure those parts in a single oven simultaneously. The tray system is designed to position parts in a vertical orientation to reduce the floor space required for the equipment. Prior to the exit point of the system, the parts are also cooled within the same equipment.
SPECIFICATIONS
| Chamber External Dimensions | 16′-0″ L x 11′-4″ W x 5′-8″ H (4877mm x 3454mm x 1727mm) |
| Conveyor Usable Size | 15′-0″ L x 5′-4″ W x 0′-6″ H (4572mm x 1626mm x 152mm) |
| Insulation Thickness | 6″ (152mm) |
| Conveyor Extensions | 5″ (127mm) entrance and exit end |
| Conveyor Type | Custom Design Product Trays |
| Conveyor Speed Control | Variable Frequency Drive |
| Heat Source | Modulating Natural Gas Fired Burners |
| Design Operating Temperature | 300°F – 662°F (149°C – 350°C) |
| Maximum Operating Temperature | 675°F (357°C) |
| Operating Voltage | 480-volt / 3-phase / 60-hertz |
| Control | Closed Loop Digital Temperature Controller |
ALTERNATIVE CAPABILITIES
Davron Technologies, Inc. provides process specific industrial inert atmosphere oven applications, including the following:
- Industries Served: Automotive, Pharmaceutical / Medical, Aerospace, Glass, Composites
- Materials/Parts Processed: Castings, Glass, Plastics, Steel, Engine Components, Cast Steel/Aluminum
- Process Applications: Inert Stress Relieving, Inert Atmosphere Annealing, Inert Atmosphere Batch, Inert Atmosphere Conveyor/Continuous
