DTI-1230 Tunnel Curing Oven
Description
This curing tunnel oven is used to cure an adhesive component on filter media used in the automotive industry. The curing tunnel oven was designed to accommodate an existing conveyor system that was part of an existing production line. Filter media and molds are loaded onto the conveying system and the urethane component is added to the product in a process located upstream. The parts enter the curing chamber and heated air is impinged on the parts in a vertical down airflow pattern.
Specifications
| Overall dimensions | 25′-2″ L x 10′-8″ W x 5′-10″ H (7671mm x 3251mm x 1778mm) |
| Interior dimensions | 25′-0″ L x 6′-2″ W x 4′-4″ H (7620mm x 1880mm x 1321mm) |
| Insulation thickness | 4″ (102mm) |
| Heat Source | Single electric heater controlled by SCR |
| Maximum operating temperature | 200°F (93°C) |
| Operating temperature range | 122°F – 158°F (50°C – 70°C) |
| Fans | One (1) circulation fan, one (1) exhaust fan |
| Airflow | Vertical Top/Down |
| Operating voltage | 480-volt / 3-phase / 60-hertz |
| Control | Digital Indicating Temperature and Over Temperature |
Alternative capabilities
Davron Technologies, Inc. provides process specific industrial inert atmosphere oven applications, including the following:
- Industries Served: Automotive, Pharmaceutical / Medical, Aerospace, Glass, Composites
- Materials/Parts Processed: Castings, Glass, Plastics, Steel, Engine Components, Cast Steel/Aluminum
- Process Applications: Inert Stress Relieving, Inert Atmosphere Annealing, Inert Atmosphere Batch, Inert Atmosphere Conveyor/Continuous
