DTI-7948 Curing Conveyor Oven
Customer directive
Our customer wanted to create an indexing single part flow inert atmosphere production furnace system to match, and seamlessly integrate into, the customer’s entire existing manufacturing process at a production rate of 45 seconds part to part. The customer’s then existing process included inefficient batch furnace staging of parts at this point in the process.
Description
The DTI-7948 conveyor oven is used for curing urethane parts within a mold. Molds are preheated and filled with a multiple component urethane mixture and placed on the oven belt for final cure. This conveyor oven is electrically heated and provides a horizontal air flow within the chamber. The conveyor speed is variable to allow for cure time variations for different products.
Specifications
| Chamber External Dimensions | 34′-0″ L x 4′-10″ W x 3′-6″ H (10363mm x 1473mm x 1067mm) |
| Conveyor Usable Size | 33′-8″ L x 4′-0″ W x 1′-10″ H (10262mm x 1219mm x 559mm) |
| Insulation Thickness | 2″ (51mm) |
| Conveyor Extensions | 1′-0″ (305mm) Entrance End and Exit End |
| Conveyor Type | Flat Wire Belt |
| Conveyor Control | Variable Frequency Drive |
| Heat Source | SCR controlled electric heater |
| Design Operating Temperature | 100°F – 150°F (38°C – 66°C) |
| Maximum Operating Temperature | 200°F (93°C) |
| Operating Voltage | 480-volt / 3-phase / 60-hertz |
| Controls | Closed Loop Digital Temperature Controller |
Alternative capabilities
Davron Technologies, Inc. provides process specific industrial inert atmosphere oven applications, including the following:
- Industries Served: Automotive, Pharmaceutical / Medical, Aerospace, Glass, Composites
- Materials/Parts Processed: Castings, Glass, Plastics, Steel, Engine Components, Cast Steel/Aluminum
- Process Applications: Inert Stress Relieving, Inert Atmosphere Annealing, Inert Atmosphere Batch, Inert Atmosphere Conveyor/Continuous
