DTI-1028 Vertical Curing Oven
SPECIFICATIONS
| Overall dimensions | 4′-6″ W x 21′-0″ H x 26′-6″ D (1372mm x 6401mm x 8077mm) |
| Insulation Thickness | 6″ (152mm) |
| Heat Source | Single full modulating natural gas burner package |
| Maximum Operating Temp | 500°F (260°C) |
| Design Operating Temp | 485°F (252°C) |
| Airflow | Horizontal cross flow |
| Circulation Fans | One (1) circulation fan, One (1) cooling supply fan |
| Exhaust Fans | One (1) exhaust fan, One (1) cooling exhaust fan |
| Operating Voltage | 480-volt / 3-phase / 60-hertz |
| Control | Digital indicating temperature and over temperature |
DESCRIPTION
The DTI-1028 vertical curing oven is used to cure carbon filters. The filters are loaded into custom fixtures and enter the heated chamber. The fixtures are indexed through the heated chamber in a vertical up and down orientation. The heated chamber includes 120 positions for heating. After the curing cycle is complete the fixtures exit the heated chamber and travel through the cooling section in a horizontal configuration. The cooling section utilizes ambient air for cooling and also includes 120 positions. After cooling the fixtures exit the cooling section and are unloaded.
FEATURES
VERTICAL OVEN CONSTRUCTION FEATURES
This vertical curing oven is constructed with structural steel framework that supports the entire oven. The oven utilizes two (2) sets of access doors located on both the front and back of the oven. The vertical oven interior is constructed of aluminized steel and the exterior is carbon steel painted with high temperature paint. The oven heat source is a single natural gas fired system.
Davron exists to be the industry leader in non-standard products engineered to meet the customer's need and unique process.
Address
4563 Pinnacle Lane
Chattanooga, TN 37415
Phone
423-870-1888
info@davrontech.com
Fax
423-870-3355
