DTI-1092 Batch Drying Oven
SPECIFICATIONS
| Exterior Dimensions | 11′-6″ W x 14′-8″ H x 8′-8″ D (3505mm x 4470mm x 2642mm) |
| Interior Dimensions | 8′-0″ W x 12′-0″ H 8′-0″ D (2438mm x 3658mm x 2438mm) |
| Heat Source | Single electric heater |
| Max Operating temperature | 250°F (121°C) |
| Design Operating temperature | 200°F – 250°F (93°C – 121°C) |
| Insulation Thickness | 4″ (102mm) |
| Operating voltage | 480-volt /3-phase /60-hertz |
| Airflow | Horizontal cross flow |
| Circulation Fans | One (1) Circulation Fan |
| Exhaust Fans | One (1) Exhaust Fan |
DESCRIPTION
The DTI-1092 batch drying oven dries ceramic modules used in the power generation industry. The drying oven includes two (2) custom product pallets. These pallets are used for loading and unloading and directs airflow through the module. The product sits on the pallet throughout the drying process. Each module weighs approximately 3,330 pounds. During the drying cycle approximately 700 pounds of water is removed from the product. The operating temperature of the oven is 257 degrees F. The circulation fan and exhaust fan utilize VFD’s to vary the volume of both circulated air and exhaust during the cycle. The system is controlled via PLC with Ethernet capabilities and touchscreen.
FEATURES
BATCH DRYING OVEN CONSTRUCTION FEATURES
This batch drying oven is constructed with a structural steel frame that supports the entire oven. The oven utilizes one (1) set of vertically hinged, full opening, doors located on the entrance end of the drying oven. The drying oven interior is constructed of aluminized steel and the exterior is painted carbon steel. The heat source of the drying oven is a single, full modulating, natural gas burner.
Davron exists to be the industry leader in non-standard products engineered to meet the customer's need and unique process.
Address
4563 Pinnacle Lane
Chattanooga, TN 37415
Phone
423-870-1888
info@davrontech.com
Fax
423-870-3355
