DTI-1135 Vertical Oven Curing System

SPECIFICATIONS

Overall Dimensions 16′-6″ L x 5′-10″ W x 15′-6″ H (5029mm x 1778mm x 4724mm)
Insulation Thickness 4″ (102mm)
Heat Source Modulating Natural Gas Burner
Maximum Temperature 500°F (260°C)
Design Operating Temperature 464°F (240°C)
Airflow Horizontal Cross Flow
Fans One (1) Circulation Fan, One (1) Cooling Fan, One (1) Cooling Exhaust Fan
Operating Voltage 480-volt / 3-phase / 60-hertz
Controls PLC with Operator Touch Screen (HMI) for all functions
   

DESCRIPTION

The DTI-1135 vertical oven cures a coating on steel components used in the automotive industry. The coating is applied to the exterior surface of the parts and the parts are then loaded into the oven via a pick and place system that is part of the oven design.

Parts are conveyed through the oven on custom product trays, attached to oven class chain, that make up the conveying system. Multiple parts are loaded across the width of each product tray and index through the oven in a vertical orientation. The control system provides the ability to adjust the index time of the conveying system to provide varying dwell times in the heated chamber.

Once the curing cycle is complete the parts travel horizontally through a cooling section located below the heated chamber and are cooled to a temperature safe for unloading.

 

FEATURES

AUTOMOTIVE SUPPLIER ADVANTAGES

  • Vertical orientation of the oven saves valuable floor space in the manufacuring area
  • Auotmated loading reduces required labor for the process

AUTOMOTIVE OVEN FEATURES

  • The oven is heated by natural gas
  • Heated airflow within the chamber is a horizontal cross flow pattern.
  • Conveying system speed is variable to allow for adjustment in production rate

Davron exists to be the industry leader in non-standard products engineered to meet the customer's need and unique process.

Address

4563 Pinnacle Lane
Chattanooga, TN 37415

Phone

423-870-1888

Email

info@davrontech.com

Fax

423-870-3355