Home
INDUSTRIAL OVENS
Conveyor Ovens
Inert Atmosphere Ovens
Vertical Ovens
Batch Ovens
Indexing Ovens
Specialty Custom Ovens
AUTOMOTIVE OVENS
Engine Components
Friction Material
Interior Components
Additional Automotive Equipment
CUSTOM EQUIPMENT FABRICATION
Conveyors & Materials Handling
Process Equipment
Automated Equipment
Teppanyaki Grill
CUSTOM QUOTE
 
Skip Navigation Links
Showing 1 - 10 of 21 Results 1  2  3  

DTI-223 Drying Conveyor Oven
This conveyor type oven dries ceramic slurry as part of a lost foam casting process. A foam blank is saturated with a ceramic slurry mixture and is placed on a conveyor belt for drying.

Dimensions (L x W x H) Heat Source Max Temperature
99’-0” x 7’-2” x 6’-10” Natural Gas 400˚  F

More Info...
$ 0.00
Average Rating:      
 
DTI-226-100 Adhesive Curing Conveyor Oven
This conveyor type oven cures adhesive on automotive drum brake linings. Adhesives are applied to the inside of the pre-cured linings to be used for bonding in a later process.

Dimensions (L x W x H) Heat Source Max Temperature
26’-3” x 7’-4” x 5’-6” Electric 300˚  F

More Info...
$ 0.00
Average Rating:      
 
DTI-244 Incline Drying Conveyor Oven
This conveyor oven dries scrap magnesium prior to introduction into a melting furnace. An exhaust system removes and replaces moisture laden air during the process.

Dimensions (L x W x H) Heat Source Max Temperature
23’-11” x 9’-8” X 4’-10” Electric 600˚  F

More Info...
$ 0.00
Average Rating:      
 
DTI-645 Curing Conveyor Oven
This conveyor oven thermally cures silicone parts in cast aluminum molds. This system includes six independent conveyors passing through the heated chamber.


Dimensions (L x W x H) Heat Source Max Temperature
11’-3” x 17’-8” X 5’-6” Electric 400˚  F

More Info...
$ 0.00
Average Rating:      
 
DTI-782 Drying Conveyor Oven
This conveyor oven removes water from a cast ceramic part. The drying system includes two independent conveyors passing through the heated chamber. Independent conveyors process parts at different rates in the same oven based on drying time requirements.

Dimensions (L x W x H) Heat Source Max Temperature
33’-0”x 12’-7” X 6’-2” Natural Gas 600˚ F

More Info...
$ 0.00
Average Rating:      
 
DTI-950 Infrared Paint Cure System
This conveyor oven system cures powder paint on automotive disk brake pads. Painted pads exit the paint spray systems and are placed on the cure oven belt by pick and place.

Dimensions (L x W x H) Heat Source Max Temperature
7’-1” x 8’-8” x 2’-2” Electric 500˚  F

More Info...
$ 0.00
Average Rating:      
 
DTI-954 Horizontal Heat Treat System
This multiple zone conveyor type oven heat treats automotive coil springs used for suspension systems. The coiled springs are placed in custom trays included with the conveyor oven system, and are conveyed through the oven for tempering.

Dimensions (L x W x H) Heat Source Max Temperature
67’-8” x 19’-7” x 5’-4” Natural Gas 800˚  F

More Info...
$ 0.00
Average Rating:      
 
DTI-9378 Preheat Oven and Cooling Conveyor
This conveying oven system preheats and cools weight balanced products. Production parts are manually placed on the conveyor belt of the preheat oven and heated to the desired temperature.

Dimensions (L x W x H) Heat Source Max Temperature
5’-8” x 5’-1” x 2’-7” Electric 300˚  F

More Info...
$ 0.00
Average Rating:      
 
DTI-7948 Curing Conveyor Oven
This conveyor oven cures urethane parts within a mold. Molds are preheated and filled with a multiple component urethane mixture and placed on the oven belt for final cure.

Dimensions (L x W x H) Heat Source Max Temperature
34’-0” x 4’-10” x 3’-6” Electric 200˚  F

More Info...
$ 0.00
Average Rating:      
 
DTI-991 Infrared Coating Cure System
This conveyor oven system cures coating on automotive disk brake pads. The coated brake pads are manually loaded onto the conveyor belt (3 parts wide).

Dimensions (L x W x H) Heat Source Max Temperature
8’-10” x 2’-6” x 8’-10” Electric 500˚  F

More Info...
$ 0.00
Average Rating:      
 
Showing 1 - 10 of 21 Results 1  2  3